Machinery
Moving and Installation
Are Inefficient Machinery Installations Holding
Your Operations Hostage?
Machinery installation or relocating heavy industrial machinery isn’t just a logistical challenge; it’s a critical operation that can significantly impact your bottom line. Misalignment leads to premature wear and tear. Extended downtime cripples production schedules. Improper setup breeds inefficiency and potential safety hazards.
Every hour your machinery sits idle, it’s not just time lost; it’s profit evaporating. The costs associated with rework, emergency repairs, and compromised production targets can quickly escalate, eating into your hard-earned revenue.
You need your industrial equipment operational, performing at peak efficiency, and contributing to your success, not hindering it. You want seamless transitions, predictable outcomes, and the peace of mind that comes with knowing the job is done right the first time—whether it’s a single machine move or a large-scale factory relocation.
Your Trusted Partner for Seamless Industrial Machinery Installation and Relocation
At Nationwide Services, we understand the intricacies of industrial machinery and provide expert machinery moving services, rigging, and installation services you can rely on. Our experienced team handles everything from heavy machinery moving and machinery relocation to turnkey installation of new production lines and equipment.
We support:
- Machinery moving and installation for manufacturing, automotive, food and beverage, distribution, and data centers
- Single machine moves or entire plant relocations
- Disassembly, crating, transportation, and reinstallation of industrial machinery across North America
Recent Machinery Work:
Our heavy equipment moving and installation work spans a wide range of equipment and industries:
- Load out, transport, offload, and install (2) Buffalo Machines weighing 80,000 lbs each and associated machinery from Louisville, KY to Atkins, VA and Jackson, OH
- Demo and install (4) bridges weighing 30,000 lbs
- Relocate (4) ovens, (3) presses, shear, and associated machinery from Boston, MA to Lawrenceburg, KY
- Demo 60,000 lb E-Beam, offload and install new 60,000 lb E-Beam and associated tunnel conveyor; cut out existing concrete for new concrete pit
- Offload and install (2) 40,000 lb presses, (6) overseas containers of powered roller conveyor, (2) robots
- Offload and install (2) 80,000 lb thermoformers
- Offload and install 45,000 lb slitter, replace shredder, install cyclone on roof
From single machine projects to complex, multi-phase moving projects involving multiple production lines, we deliver consistent results.
Results Speak Louder Than Words
We’re not just promising quality; we’re delivering it, project after project, across diverse industries. Here’s why leading companies trust Nationwide Services with their most critical machinery moving and installation needs:
Decades of Unrivaled Expertise
With years of experience, our team has extensive experience handling everything from delicate food-grade equipment to heavy machinery and large-scale industrial equipment. We speak the language of eCommerce, manufacturing, distribution, food-grade, chemical, utility, automotive, and more.
Our millwrights, riggers, and technicians understand how production lines, conveyors, and specialized equipment must work together to keep your plant running efficiently.
Precision Tools for Peak Performance
We don’t guess; we measure. Our machinery movers use specialized equipment, precision tools, lasers, and advanced leveling techniques to ensure your machinery operates within tight manufacturer specifications. The result:
- Reduced wear and tear
- Optimized performance
- Extended lifespan for your valuable assets
Whether it’s a CNC machine, injection molding line, or heavy press, proper alignment and installation are central to our process.
Downtime Minimized, Disruption Controlled
We understand how critical uptime is to your business. Our machinery moving services are built around minimizing downtime and controlling disruption. From detailed pre-planning to phased execution, we design each moving project to keep your operations as productive as possible during transitions.
For many clients, we work during off-hours, weekends, or in stages, so production can continue while moving equipment or installing new systems.
Turnkey Project Management
Say goodbye to the headache of coordinating multiple providers. Nationwide Services offers true turnkey solutions:
- Rigging and heavy lifting
- Machinery dismantling and disassembly
- Crating, secure transportation, and heavy equipment moving
- Reinstallation, alignment, and commissioning
You get one point of contact, one experienced team, and one integrated plan—so your moving and installation project stays on time and on budget.
Safety—Our Unwavering Commitment
We operate under OSHA safety standards and follow industry best practices on every jobsite. Our rigging services, forklift operations, crane work, and gantry lifts are performed by trained professionals with a focus on protecting:
- Your team
- Your facility
- Our Nationwide Services employees
Safe execution is non-negotiable in every plant relocation, factory relocation, or machinery installation we perform.
Precision in Every Machinery Installation Project
We believe in transparency, planning, and clear communication. Here’s a closer look at our proven approach:
Pre-Installation Planning & Site Preparation
We collaborate closely with your engineers, integrators, and internal project management team, conducting thorough site assessments and logistical planning to make sure every detail is accounted for before a single piece of equipment moves.
We review:
- Your team
- Your facility
- Our Nationwide Services employees
Safe execution is non-negotiable in every plant relocation, factory relocation, or machinery installation we perform.
Rigging & Heavy Lifting
Our in-house team of certified millwrights and rigging specialists use state-of-the-art equipment—cranes, forklifts, gantries, skates, and jacks—to safely and efficiently lift, move, and precisely position machinery of any size.
From tight spaces to overhead lifts, our riggers are trained to manage complex conditions and heavy machinery moving with control and confidence.
Precision Alignment & Leveling
Machinery installation is only as good as its final alignment. Using precision tools and proven techniques, we install your equipment to the exact tolerances required by the manufacturer.
This meticulous attention to detail:
- Reduces mechanical stress
- Improves energy efficiency
- Extends the operational life of your machinery
Mechanical & Structural Assembly
Our skilled technicians handle component reassembly, structural modifications, and secure fastening to integrate your equipment into the facility. Whether it’s attaching conveyors, connecting to existing systems, or setting up support structures, we ensure everything fits and functions as intended.
System Integration & Commissioning
Once the machinery is installed, we work with your engineering team and controls integrators to support system integration and commissioning.
We assist in:
- Dry runs and functional testing
- Fine-tuning alignment and performance
- Verifying that equipment meets performance specifications
Our goal is a smooth startup with minimal troubleshooting on the floor.
Relocation & Reinstallation
When plant relocations, reconfigurations, or entire plant moves are necessary, our experienced team manages this
Our whole process:
- Careful dismantling and disassembly
- Labeling and documentation
- Crating and transporting moving equipment
- Reinstallation and start-up at the new site
From a single machine to an entire plant, we provide continuity, control, and minimal downtime.
FAQs: Machinery Moving and Installation
The size, weight, and complexity of the industrial machinery
Best practices include detailed planning, proper rigging, and using the right specialized equipment. Before any heavy machinery moving begins, we assess the route, floor capacity, overhead clearances, and lifting points. Certified riggers and millwrights handle all lifts using cranes, forklifts, or gantry systems designed for the load. Once in place, machinery is aligned and leveled to manufacturer specifications, and all connections are checked before startup.
What are the key considerations when planning a machinery moving and installation project?
Key considerations include:
- The size, weight, and complexity of the industrial machinery
- Impact on production lines and scheduling to reduce downtime
- Space constraints, access points, and staging areas
- Safety requirements and OSHA compliance
- Coordination with your general contractor, engineers, and other providers
We work with you up front to address all of these factors so the moving project runs smoothly.
What factors should I consider when hiring a machinery moving and installation service?
Key considerations include:
- The size, weight, and complexity of the industrial machinery
- Impact on production lines and scheduling to reduce downtime
- Space constraints, access points, and staging areas
- Safety requirements and OSHA compliance
- Coordination with your general contractor, engineers, and other providers
We work with you up front to address all of these factors so the moving project runs smoothly.
How do I choose the right company for machinery moving and installation services?
The right company will act as a trusted partner, not just a vendor. Look for:
- Demonstrated experience with your type of industrial equipment (CNC machine, injection molding, presses, conveyors, etc.)
- Clear project management and communication
- Capacity to handle both single machine moves and large-scale factory relocations
- Coverage for your region or across North America, if you have multiple sites
Nationwide Services combines technical expertise, specialized equipment, and a turnkey approach to keep your risk low and your machinery performing as expected.